The basic steps of mapping the stamping die

According to the national drawing standards, combined with our standard drawing and parts drawing and requirement of process data, map stamping die process. （ 1) Stamping die assembly diagram should include the following contents: 1) Molding part 2) The structure of pouring system and exhaust system. 3) Parting surface and die a way. 4) Shape structure and all fittings, positioning, and leads to a position. 5) Mark and die cavity height size overall size. 6) Auxiliary tool. 7) In order to all parts serial number make up, and fill in the details. 8) Technical requirements and instructions. （ 2) Technical requirements of stamping die assembly drawing content: 1) For mold performance requirements of the certain system. In the ejection system, for example, the slide block core pulling structure assembly requirements. 2) To the mold assembly process requirements. Such as mold assembly the parting of the joint surface after joint clearance should not be greater than zero. 05 mm mold, the parallel degree requirements, and points out that determined by the assembly size and the size of the request. 3) Mold use, installation method. 4) Anti oxidation treatment, mould number, lettering, tag, such as oil seal, storage requirements. 5) Relevant test and inspection requirements. Dongguan precision, twenty years of experience in stamping die design engineer team, stamping die development cycle fast, hand sample mould about 12 days, 20 days or so to complete the first formal production mould directly, quickly response to the high precision requirements in the early period of the shrapnel terminal samples requirements. Precision contact: I wish you all a happy New Year and all the best, if you want to learn more dynamic, can scan the qr code, pay attention to the public. , is committed to precision stamping processing factory of the world's most professional electronic components