How to choose oil for stamping parts processing

In the process of producing stamping parts, the use of stamping oil is essential. It can not only be considered that the stamping process provides outstanding lubricity and cooling, but also helps to extend the service life of the equipment. So what are the conditions for the oil demand for stamping parts? First of all, of course, it must have excellent lubricity, otherwise it will have an adverse effect on the workpiece or the material. Not only the quality of the stamping parts is not high, but the service life of the stamping die will also be shortened. At the same time, it must have a certain degree of cooling. A lot of heat will be generated during the stamping process. If it cannot be emitted in time, it will simply cause the deformation of the material. In order to effectively avoid rusting of the present parts after forming, the stamping oil used must have anti-rust properties, so that the oil film on the surface of the stamping parts can be protected from damage, and then the outstanding rust prevention effect can be achieved. In practical use, the anti-rust effect is also affected by factors such as the nature of the stamping oil, processing conditions and environmental factors, so the oil has higher requirements for anti-rust properties. In order to improve the output power while simplifying the process, the oil used in the stamping parts is required to have the effect of welding with oil, so as to avoid the shortcomings of the stamping parts with oil welding. At the same time, degreasing is also one of the basic functional requirements of stamping, don't forget. In addition, because the oil is generally applied to the plate before the stamping part is processed, it must have outstanding maneuverability and be able to continue for a while. On the one hand, other functions of the stamping oil are affected by the passage of time. Decline. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections