High-quality Dongguan hardware stamping parts, solve this problem, increase productivity by 17% + 3 million punching next day production capacity

The technicians of the high-quality Dongguan metal stamping parts processing plant mentioned the reasons for the production of waste during stamping. The following Xiaoshuo will take you to see the specific reasons and how to solve the problems in this area: Reason: 1. The quality of raw materials is inferior. ; Improper installation, adjustment and use of the die; 2. The operator did not feed the strip correctly along the positioning or did not ensure that the strip was fed in a certain gap; due to long-term use, the gap changed or the working parts and guide parts of the die were worn out 3. The installation position of the die is changed due to the long time of impact and vibration, and the fastening parts are loose; the operator's negligence does not operate according to the operating rules. Countermeasures: 1. The raw materials must conform to the specified technical conditions, and all the links specified in the process regulations should be fully and strictly abided; 2. The presses and dies and other tooling equipment used should be guaranteed to be in normal working conditions 3. Establish a strict inspection system during the production process. The first stamping parts must be fully inspected, and then can be put into production after the inspection is qualified. At the same time, the inspection should be strengthened. When an accident occurs, it should be dealt with in time and ensured during the stamping process. For the cleaning of the mold cavity, the orderly processed workpieces in the workplace should be arranged neatly. , 15 years of focusing on high-quality Dongguan hardware stamping parts, monthly 100+ sets of mold processing and assembly capabilities. There is quantity, accuracy, and efficiency. The next-day production capacity of 3 million punches, 16 strict quality inspections, and the stamping accuracy can reach 0.01mm, which can quickly solve the time emergency problem of stamping parts processing, solve the stamping accuracy problem, and solve the production quality problem for you. Choose, choose rest assured!